New Series of Structures from OwlMtModels Under Development

Just a quick cross-post from OwlMtModelsNews Blog Page

Owl Mountain Models is working on several fun projects which have been behind closed curtains until now.  The Owenyo structures which we need for the demo/photography layout will be made available in very limited production to meet reservations, which are open as of 2023-11-17.  No down-payment will be required, as we're still early in development of the CAD models.  Both HO and S-scale versions are planned to be offered.  Price is currently TBD until designs are finalized and we get quote from 3d printer.

Researching this structure has required many hours studying photos, aerial photos, and modern archaeological measurements.  We want to produce the best kits, balancing details and final finish looks.  This results in currently planning that the upper boards will be stain-able strip-wood, while the bents and lower structural members will be 3d printed with NBW details already in place.  Basic wood-effects should be pretty easily added to the 3d printed resin parts, like the finishing on our plastic lumber loads.

The full length of the trestle with NG approach from level grade over the SG Tell-Tales is over 7 feet long!  That's why we'll be offering the trestle as modular pieces, so that it can be fit onto smaller layouts.  The OwlMtModels photo-demo layout trestle will be shortened to only 4-GS gondolas for the dump section and most of the Approach Trestle will be truncated into the backdrop wall.

High-angle view of the dumping section of the trestle.

Jason's been working hard looking at all the photos he can to check for the details.  The CAD allows all the pieces to be worked out in 3d, resolving and solving questions about the prototype photos, which he's not seen solved in previously published drawings. Hopefully, this will be the best researched model of the Transfer Trestle yet produced.  Research is still continuing in 2023.

Water Tank

Rough CAD rendering 2023-11-17, subject to redesign and detailing.

The water tank at Owenyo was moved from Diaz in 1952 according to the Employe Timetable station ans services list.  There's still much more to add to this CAD model, but it will make an amazing little tank for any small engine facility.  The footing should be about 2.5" diameter and estimating about 4" tall for HO scale.

Bulk Loader/Conveyor Shed

Partly drawn as of 2023-11-17 work-in-progress

Another structure which is researched from many photos and modern archaeological research of remains.  This structure will also make a great little loader for boxcars or covered hoppers on any small layout, for those not modeling Owenyo specifically.

Pump Houses

We have some research on the Water Pump House and photos, which should allow a model to be produced.  As of 2023-11-17, Jason hasn't started the drawings for this structure.  The Fuel Oil Pump House will also be made, but research is minimal at the current time, and the CAD model has not been started at this time.

Reservations Contact

Currently, two customers have expressed interest in kits for these parts.  Please show your support by contacting sales@OwlMtModels.com to submit reservation, specifications of what size and scale is desired.

- End Cross-posted Article - 

Jason Hill - OwlMtModels